KITONGO GOLD PROJECT PREVIOUS EXPLORATION

Extensive drilling programs were carried out by EAGM between 1993 and 1999. RAB and aircore (AC) drilling was used to test conceptual and structural targets and as first pass testing of geochemical anomalies. RC and core drilling was used to test targets at depth and for resource definition. Drilling and detailed magnetic for the main prospect areas is shown in the figures below.

Work completed to date is summarized in the table below.

Hole Type	Code	Number of Holes	Total Depth
Diamond	DD	13	1,432
Reverse Circulation	RC	226	19,256
Air Core	AC	594	6,755
RAB	RB	832	33,821
Trench	TR	19	1,380
Total		1,684	62,644

Summary of Historic Drilling and Trenching at Kitongo Project

Better results from drilling within the resource are shown in the table below.

Collar Location and Orientation								Intersection at 0.5ppm Au Cut-off
Hole	Type	X	Y	Z	Total Depth	Dip	Azimuth	From (m)	To (m)	Length (m)	Au (ppm)
KTDD007	DD	10,445	4,075	1,214	36.5	-60	268	4	30	26	3.09
KTDD008	DD	10,470	4,075	1,214	52.4	-60	268	27	52	25	8.01
KTDD011	DD	10,455	4,150	1,215	45	-60	268	17	45	28	4.02
KTRC002	RC	10,399	4,001	1,214	70	-90	0	0	23	23	5.86
KTRC004	RC	10,400	4,200	1,215	60	-90	0	0	23	23	4.31
KTRC042	RC	10,466	3,999	1,213	119	-60	270	23	39	16	3.59
KTRC043	RC	10,425	4,000	1,213	105	-59	270	15	38	23	3.71
KTRC044	RC	10,351	3,945	1,213	100	-59	0	21	62	41	1.74
KTRC050	RC	10,425	4,200	1,215	87	-60	270	22	34	12	10.87
KTRC066	RC	10,450	4,150	1,215	94	-58	270	10	42	32	4.67
KTRC067	RC	10,451	4,100	1,215	70	-60	270	9	39	30	4.02
KTRC072	RC	10,445	4,050	1,214	60	-60	270	0	26	26	5.75
KTRC089	RC	10,450	4,025	1,214	81	-60	270	35	51	16	7.78
KTRC098	RC	10,425	4,075	1,214	39	-60	270	0	20	20	4.43
KTRC100	RC	10,450	4,125	1,215	42	-60	270	12	35	23	3.46
KTRC101	RC	10,450	4,175	1,215	60	-60	270	19	43	24	2.95
KTRC107	RC	10,500	4,250	1,214	99	-60	270	63	94	31	2.23
KTRC114	RC	10,301	4,350	1,216	42	-60	270	0	18	18	2.92
KTRC156	RC	10,475	4,075	1,214	72	-60	270	28	66	38	5.63
KTRC158	RC	10,475	4,175	1,214	75	-60	270	38	58	20	3.08

The prospective horizons at Kitongo have been defined by shallow RAC and AC drilling and geophysical surveys (Induced Polarisation and Aeromagnetic surveys). They suggest that the BIF and sedimentary sequence which is host to the Main Zone mineralisation extend for some 5km to the northwest of the Main Zone resource. Within that 5km of strike structural offsets and pinching and swelling of the main units appears to be present, however substantial gold mineralisation has been intersected in RC and RAB drilling. The better intersections in this zone are included in the following table. These are outside the existing resource envelope.

Intersections Outside of Resource Envelope.

Collar Location and Orientation								Intersection at 0.5ppm Au Cut-off
Hole	Type	X	Y	Z	Total Depth	Dip	Azimuth	From (m)	To (m)	Length (m)	Au (ppm)
Northern shear
KTRC139	RC	10,099	4,601	1,218	72	-60	270	39	47	8	2.36
KTRC140	RC	10,150	4,600	1,217	66	-60	270	53	66	13	6.98
KTRC140	RC	10,150	4,600	1,217	66	-60	270	39	44	5	2.04
KTRC142	RC	10,251	4,550	1,215	66	-60	270	41	48	7	4.83
South Limb
KTRB292	RB	10,250	4,059	1,220	48	-60	180	20	36	16	3.38
KTRC086	RC	10,250	4,050	1,215	60	-60	270	14	25	11	2.61
KTRC143	RC	10,005	4,211	1,218	59	-60	270	36	45	9	2.89
KTRC144	RC	10,054	4,210	1,218	45	-60	270	33	37	4	4.26
Isegenghe
KTRC225	RC	9,250	4,467	1,220	159	-55	0	131	156	25	12.96
KTRC235	RC	9,200	4,593	1,236	162	-50	180	141	144	3	19.60
KTRC240	RC	9,220	4,475	1,221	177	-60	0	116	120	4	3.58
KTRC242	RC	9,220	4,460	1,220	73	-60	0	46	48	2	15.75
KTRC244	RC	9,160	4,510	1,224	99	-60	180	81	83	2	5.75
Kitongo Hill
KTRC175	RC	7,411	5,837	1,242	168	-70	180	48	58	10	2.14
KTRC180	RC	7,258	5,848	1,238	159	-60	180	74	83	9	12.95
KTRC208	RC	7,150	5,905	1,246	111	-55	180	77	84	7	1.84
KTRC213	RC	7,300	5,800	1,227	102	-60	180	15	19	4	2.97